The Wall Vent [Lite]s are made of 100% ABS Plastic while the Wall Vent [Luxe]s are made of 100% Powder Coated Steel. At about 40% the price, the Wall Vent [Lite]s are the price-conscious alternative to the Wall Vent [Luxe]s.
All wall vents were designed specifically for walls and ceilings made of drywall. Both lineups have a model with a beaded rim that contours the vent flush into the surface.
The Wall Vent [Luxe] line has air control dampers built into every model. These are pliable metal dampers that can be adjusted to release, or restrict airflow at any time.
While the Wall Vent [Lite]s do not have air flow control, we have created the Lite Damper, an accessory to make up for this. Our Lite Dampers are made of the same powder coated steel as the Wall Vent [Luxe]s. Simply attach to the back of the models and click into place.
Be sure to install the Lite Dampers on the Flush Wall Vent [Lite] prior to mudding. Once the Flush Wall Vent [Lite] is installed, you will not be able to access the back of the vent to attach/clip the Lite Dampers in.
The "tray" is the centre cover of the Wall Vent [Luxe] models like the trays on our floor models. On one of the plate's four sides you will find a circular hole in the middle.
Once you find the hole, push the side of the plate cover with the hole until it unlocks - you will hear a snap/click. The Wall Vent [Lite]s are much simpler and only require you to pull them straight off.
So there you have it - competitors for life.
Follow us on Instagram to see this rivalry explode!